CCNA/CCNP Cisco OSPF v2 and v3 (IPv6) lab set
Covered technologies, OSPF v2 (IPv4) and OSPF v3 (IPv6)
Lab requirements: x4 vCPU, 8GB RAM Images used in labs: - vios-adventerprisek9-m.SPA.158-3.M2
- EVE-NG Docker: eve-gui-server
Labs package: - 3-1 Single-Area OSPFv2.unl
- 3-2 Multi-Area OSPFv2.unl
- 3-3 Route Summarization OSPFv2.unl
- 3-4 Virtual-Link OSPFv2.unl
- 3-5 Multi-Area OSPFv3.unl
Note: After lab set is imported, please make sure you have set for lab with proper vIOS image. The image version used in lab, is shown on the Topology. Lab contains 2 configuration sets Default and Solved. Default configuration set has no configuration.
Steps to start a lab: - Make sure your lab has set proper vIOS images version for all nodes
- Use Side bar/More Actions/Wipe All (clean previous saved NVRAM)
- Side bar/More Actions/Start All
- Side Bar/Lab Tasks/Workbook
Enjoy
实验所需镜像从以下帖子获取：
http://www.emulatedlab.com/forum.php?mod=viewthread&tid=939
| 
发表于 2022-3-5 14:27:13
