H3C VSR可以支持IRF堆叠，终于可以摆脱官方模拟器，非常棒....
本帖最后由 cfplzjc 于 2021-12-27 10:21 编辑1、网络拓扑，积分不够发不了图。
2、关键配置
<DeviceA> system-view irf topo-domain 10
The configuration will take effect at the next startup. irf-port port group interface gigabitethernet 1/0 quit
chassis convert mode irf，注意重启A后，马上重启B，要不然容易堆叠失败。The device will reboot to operate in IRF mode. You are recommended to save the running configuration to the next-startup configuration file. Continue? :y
flash:/startup.cfg exists, overwrite? :y
Do you want to convert the content of the next-startup configuration file flash:/startup.cfg to make it available in IRF mode? :y
The configuration file is converted successfully.-----------------------------------------------------------------------<DeviceB> system-view irf member 2 irf topo-domain 10
irf-port port group interface gigabitethernet 1/0
chassis convert mode irfThe device will reboot to operate in IRF mode. You are recommended to save the running configuration to the next-startup configuration file. Continue? :y
flash:/startup.cfg exists, overwrite? :y
Do you want to convert the content of the next-startup configuration file flash:/startup.cfg to make it available in IRF mode? :y
The configuration file is converted successfully.3、实验结果。
4、优化，增加堆叠分裂探测。交换机简单配置下
<DeviceA> system-view irf domain 10
interface reth 1 member interface gigabitethernet 1/2/0 priority 100 member interface gigabitethernet 2/2/0 priority 80 interface reth 1 mad arp enable 就是限制字符个数，把图片删了才能发表帖子。 cfplzjc 发表于 2020-9-28 10:31
就是限制字符个数，把图片删了才能发表帖子。
网络拓扑
cfplzjc 发表于 2020-9-28 12:02
网络拓扑
实验结果
模拟不了交换机啊！ boy6585948 发表于 2020-9-28 20:37
模拟不了交换机啊！
这个没必要，我主要看重的是堆叠的过程很像框式的，不像之前的HCL模拟的很像盒式的。 h3cvsr2k最新版有吗 H3C VSR EVE-NG IRF LAB 感谢大佬分享 不错 感谢分享 找了很久 IRF技术不太懂它
页:
[1]
2