Cisco SDWAN Multicast Overlay VXLAN

hbugs001

Lab requirements: x28 vCPU, 64GB RAM

Images used in labs:

• i86bi_LinuxL3-AdvEnterpriseK9-M2_157_3_May_2018.bin
• i86bi_linux_l2-adventerprisek9-ms.SSA.high_iron_20190423.bin
• csr1000vng-universalk9.17.03.02.Amsterdam
• Cisco Viptela SDWAN 20.3.2, vManage, vBond, vEdge, vSmart
• nxosv9k-9300v-9.3.6
• EVE-NG Docker: eve-gui-server
• EVE-NG Docker: wireshark
• VPCS host device
  

Steps to start a lab:

• Make sure your lab has set proper images version for all nodes
• Use Side bar/More Actions/Wipe All (clean previous saved NVRAM)
• Side bar/More Actions/Start All
• Side Bar/Lab Tasks/Workbook
  

实验所需镜像从以下帖子获取：
http://www.emulatedlab.com/forum.php?mod=viewthread&tid=939

Pofe_hepta7

感谢大佬的无私分享

ooooooooo

感谢分享

xiaoxiaohe99

感谢分享

peterwater

感谢分享

hupeijun

这个拓扑导入到eve好像打开不呢

hupeijun

这个拓扑导入到eve打不开是咋回事哦

hupeijun

这个拓扑导入到eve打不开是咋回事哦

hbugs001

hupeijun 发表于 2022-9-24 12:40
这个拓扑导入到eve打不开是咋回事哦

包含docker镜像的只支持pro

yinshi

vedge的授权哪里可以获取啊？