<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>EmulatedLab - 答疑专用</title>
    <link>https://www.emulatedlab.com/forum-67-1.html</link>
    <description>Latest 20 threads of 答疑专用</description>
    <copyright>Copyright(C) EmulatedLab</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 03 May 2026 21:16:16 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.emulatedlab.com/static/image/common/logo_88_31.gif</url>
      <title>EmulatedLab</title>
      <link>https://www.emulatedlab.com/</link>
    </image>
    <item>
      <title>IPSEC(国密双隧道)+BGP问题</title>
      <link>https://www.emulatedlab.com/thread-2292-1-1.html</link>
      <description><![CDATA[拓扑图如上，使用国密算法SM3和SM4时，ike起不来，报错，找不到完整的ikeproposal。改为商用算法AES512和SHA512就起来了，安全策略没有变动，都是any-any。拓扑和文件在附件里，有没有大佬帮忙看看是哪里的问题，不能是模拟器不支持国密算法吧。后面为拓扑文件的链接 _ ...]]></description>
      <category>答疑专用</category>
      <author>janhay</author>
      <pubDate>Tue, 23 Dec 2025 07:36:02 +0000</pubDate>
    </item>
    <item>
      <title>ce12800接口不够用怎么添加可用接口</title>
      <link>https://www.emulatedlab.com/thread-2253-1-1.html</link>
      <description><![CDATA[做实验，需要在ce12800连接20多个接口
有大佬知道怎么解决吗？]]></description>
      <category>答疑专用</category>
      <author>kangyy</author>
      <pubDate>Sat, 01 Nov 2025 16:04:33 +0000</pubDate>
    </item>
    <item>
      <title>如何人为增加网络延迟时间？</title>
      <link>https://www.emulatedlab.com/thread-2252-1-1.html</link>
      <description><![CDATA[公司在今年9月底中标了一单位的一批监控的维保，从摄像头到机房端是租用的广电的裸线，说是租用，其实就是从外面汇聚箱拉的光缆到机房，中间不经过任何广电的设备。这个单位的光监控就有好几家来维保的，我们只是一部分，我这部分前面是广电的在维保，由于是租用，我们 ...]]></description>
      <category>答疑专用</category>
      <author>遇江南</author>
      <pubDate>Sat, 01 Nov 2025 09:23:02 +0000</pubDate>
    </item>
    <item>
      <title>EVE-NG如何开启默认被down掉的端口</title>
      <link>https://www.emulatedlab.com/thread-2245-1-1.html</link>
      <description><![CDATA[交换机型号hwce6800
更改了接口数量26个
但在交换机内开不起来
g1/0/20接口有设备连接
设备也已经启动了]]></description>
      <category>答疑专用</category>
      <author>kangyy</author>
      <pubDate>Fri, 10 Oct 2025 05:18:13 +0000</pubDate>
    </item>
    <item>
      <title>求教，有h3cS6850、ruijie的镜像吗</title>
      <link>https://www.emulatedlab.com/thread-2242-1-1.html</link>
      <description><![CDATA[求教，有h3cS6850、ruijie的镜像吗？
关于山石网科设备的配置导入导出失败是为什么呢]]></description>
      <category>答疑专用</category>
      <author>会飞的牛</author>
      <pubDate>Fri, 19 Sep 2025 12:02:19 +0000</pubDate>
    </item>
    <item>
      <title>咨询一个关于EVE-NG 6.0 端口转发的问题。</title>
      <link>https://www.emulatedlab.com/thread-2237-1-1.html</link>
      <description><![CDATA[版本：EVE-NG 懒人版 6.0
搭建环境描述：
PC1与PC2在同一个网络，互相能Ping通。PC1的IP地址：192.168.1.1，PC2的IP地址：192.168.1.2。
PC1作为宿主机，通过VMware安装EVE-NG，网络选择NAT模式，EVE的IP为10.100.1.10。
同时在VMware上，配置端口转发，端口80，22，327 ...]]></description>
      <category>答疑专用</category>
      <author>Freedom117</author>
      <pubDate>Sat, 30 Aug 2025 12:28:13 +0000</pubDate>
    </item>
    <item>
      <title>H3C ACG如何用mobax telnet登录</title>
      <link>https://www.emulatedlab.com/thread-2234-1-1.html</link>
      <description><![CDATA[使用H3C 的ACG如果是telnet方式用mobax连接没有回显信息，如果是vnc连接是有回显信息的，这是为什么]]></description>
      <category>答疑专用</category>
      <author>NewBeQ</author>
      <pubDate>Fri, 15 Aug 2025 08:34:14 +0000</pubDate>
    </item>
    <item>
      <title>如何扩容EVE上虚机的硬盘？</title>
      <link>https://www.emulatedlab.com/thread-2224-1-1.html</link>
      <description><![CDATA[模板文件里也没有设置虚机硬盘大小的地方，是有什么命令吗？]]></description>
      <category>答疑专用</category>
      <author>flickxie</author>
      <pubDate>Thu, 10 Jul 2025 01:31:25 +0000</pubDate>
    </item>
    <item>
      <title>eve-ng怎么配合WindTerm使用</title>
      <link>https://www.emulatedlab.com/thread-2220-1-1.html</link>
      <description><![CDATA[已经装了这个EVE-NG-Win-Client-Pack-2.0软件，尝试加了注册表，可以打开但是没办法连接到设备里面，有没有大佬知道要怎么做]]></description>
      <category>答疑专用</category>
      <author>如何是好</author>
      <pubDate>Mon, 16 Jun 2025 07:13:53 +0000</pubDate>
    </item>
    <item>
      <title>eve关联wireshark</title>
      <link>https://www.emulatedlab.com/thread-2196-1-1.html</link>
      <description><![CDATA[懒人版6.0关联了wireshark,打开抓包后，抓包界面无显示，空白；看不到抓包内容
wireshark 版本4.4.6]]></description>
      <category>答疑专用</category>
      <author>1317219869</author>
      <pubDate>Thu, 15 May 2025 15:56:47 +0000</pubDate>
    </item>
    <item>
      <title>锐捷交换机打开镜像，显示如图所示代码</title>
      <link>https://www.emulatedlab.com/thread-2181-1-1.html</link>
      <description><![CDATA[华为华三，和部分思科的镜像可以正常打开，电脑配置为I9-13900HX，没有装360杀毒软件，虚拟化已按教程设置好，使用的是6.2.0-4社区版。]]></description>
      <category>答疑专用</category>
      <author>lulu</author>
      <pubDate>Wed, 16 Apr 2025 04:30:22 +0000</pubDate>
    </item>
    <item>
      <title>H3C vSwitch S9850-R7639P06 三层RAGG聚合直连不通</title>
      <link>https://www.emulatedlab.com/thread-2146-1-1.html</link>
      <description><![CDATA[H3C vSwitch S9850 7.1.070-R7639P06 配置三层聚合后直连ping不通，三层动态链路聚合协商正常，不知道大家有没有这个问题]]></description>
      <category>答疑专用</category>
      <author>13292942521</author>
      <pubDate>Mon, 07 Apr 2025 05:50:39 +0000</pubDate>
    </item>
    <item>
      <title>添加镜像，权限修复时报错</title>
      <link>https://www.emulatedlab.com/thread-2129-1-1.html</link>
      <description><![CDATA[想问下各位，在权限修复时出现以上截图报错，这个该如何解决]]></description>
      <category>答疑专用</category>
      <author>Iamada</author>
      <pubDate>Fri, 21 Mar 2025 03:33:33 +0000</pubDate>
    </item>
    <item>
      <title>H3C vSwitch S9850 7.1.070-R7639P06一会就自动重启？</title>
      <link>https://www.emulatedlab.com/thread-2107-1-1.html</link>
      <description><![CDATA[H3C vSwitch S9850 7.1.070-R7639P06一下就自动重启，配了2个cpu ,8G内存也是一样，并且配网络也不通，不知道大家有没有这个问题]]></description>
      <category>答疑专用</category>
      <author>546948647</author>
      <pubDate>Sun, 19 Jan 2025 02:42:35 +0000</pubDate>
    </item>
    <item>
      <title>进入Palo Alto的密码是多少</title>
      <link>https://www.emulatedlab.com/thread-2103-1-1.html</link>
      <description><![CDATA[我用EVE导入的是Palo Alto版本是下面几个
·paloalto-10.2.5-Pre-Licensed-Eval
·paloalto-10.2.3
·paloalto-11.0.0
我用的用户名和密码就是QEMU镜像用户名密码列表的这个
Username: admin
Password: admin
但是就是进不去，上面的3个版本都是尝试了，都不行。
大家谁 ...]]></description>
      <category>答疑专用</category>
      <author>wangbo020783126</author>
      <pubDate>Tue, 24 Dec 2024 13:50:10 +0000</pubDate>
    </item>
    <item>
      <title>Cisco ISE无法启动问题</title>
      <link>https://www.emulatedlab.com/thread-2102-1-1.html</link>
      <description><![CDATA[有大神可以帮忙看看吗？感谢！
[  194.435658] dracut-initqueue[357]: Warning: dracut-initqueue timeout - starting timeout scripts
[  194.435780] dracut-initqueue[357]: Warning: Could not boot.
         Starting Setup Virtual Console...
[  OK  ] Started ...]]></description>
      <category>答疑专用</category>
      <author>kikihetiy</author>
      <pubDate>Mon, 23 Dec 2024 08:10:15 +0000</pubDate>
    </item>
    <item>
      <title>linux-slax-64bit-9.3.0.tga解压后是iso文件，如何使用</title>
      <link>https://www.emulatedlab.com/thread-2101-1-1.html</link>
      <description><![CDATA[linux-slax-64bit-9.3.0.tga解压后是iso文件，如何使用]]></description>
      <category>答疑专用</category>
      <author>546948647</author>
      <pubDate>Fri, 20 Dec 2024 02:25:11 +0000</pubDate>
    </item>
    <item>
      <title>关于AMD处理器的电脑使用锐捷镜像问题的解决办法</title>
      <link>https://www.emulatedlab.com/thread-2096-1-1.html</link>
      <description><![CDATA[AMD处理器的电脑
通过VMware虚拟机运行eve-ng
使用锐捷镜像的过程中遇到镜像自动重启的问题


有人反馈说在虚拟机的CPU设置里面把\&quot;虚拟化 CPU性能计数器\&quot;给勾选上就可以解决这个问题。



我为此发布这个投票，如果是AMD处理器的用户并且需要用到锐捷镜像的试试这个办法 ...]]></description>
      <category>答疑专用</category>
      <author>熄灭的蜡烛</author>
      <pubDate>Mon, 11 Nov 2024 12:36:34 +0000</pubDate>
    </item>
    <item>
      <title>PVE 登录密码是多少</title>
      <link>https://www.emulatedlab.com/thread-2094-1-1.html</link>
      <description><![CDATA[已经重置]]></description>
      <category>答疑专用</category>
      <author>RojoCai</author>
      <pubDate>Sun, 27 Oct 2024 13:08:37 +0000</pubDate>
    </item>
    <item>
      <title>eve-ng外网访问</title>
      <link>https://www.emulatedlab.com/thread-2093-1-1.html</link>
      <description><![CDATA[咨询一下。我在虚机上部署了6.2.0-4-Community。然后想域名反向代理+域名解析。只能到login页面，输入用户名和密码以后点击sign in没反应。本地局域网IP地址没有问题。这个谁知道的。

     

直接用IP地址访问就没问题

 ...]]></description>
      <category>答疑专用</category>
      <author>RojoCai</author>
      <pubDate>Thu, 03 Oct 2024 03:52:37 +0000</pubDate>
    </item>
  </channel>
</rss>