<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>EmulatedLab - 案例分享</title>
    <link>https://www.emulatedlab.com/forum-53-1.html</link>
    <description>Latest 20 threads of 案例分享</description>
    <copyright>Copyright(C) EmulatedLab</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 17 Jun 2026 22:31:39 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.emulatedlab.com/static/image/common/logo_88_31.gif</url>
      <title>EmulatedLab</title>
      <link>https://www.emulatedlab.com/</link>
    </image>
    <item>
      <title>防火墙双活OSPF+VRRP经典组网</title>
      <link>https://www.emulatedlab.com/thread-2349-1-1.html</link>
      <description><![CDATA[背景：
SW1为PC1的网关，SW2为PC2的网关，防火墙为双活组网，出口路由器连接两个ISP网络，通过主备静态路由来控制访问，拓扑图如下：

配置如下：
SW1：
sysname SW1
#
vlan batch 10 20 100 to 102 201 to 202
#
cluster enable
ntdp enable
ndp enable
#
drop illegal ...]]></description>
      <category>案例分享</category>
      <author>yangjinyu945</author>
      <pubDate>Tue, 16 Jun 2026 14:04:03 +0000</pubDate>
    </item>
    <item>
      <title>园区网中多路由域路由重发布设计</title>
      <link>https://www.emulatedlab.com/thread-2306-1-1.html</link>
      <description><![CDATA[在园区网中，经常会遇到多路由协议共存的场景，多路由协议相互重发布会产生各种问题，搞得大家焦头烂额，今天针对这一场景的配置要点，给大家作一分享，希望可以帮助到大家。
本文相关内容摘自《路由之路》，如需获得完整资料，可以联系本文原创作者  13485384867（微信 ...]]></description>
      <category>案例分享</category>
      <author>network123</author>
      <pubDate>Wed, 07 Jan 2026 02:17:24 +0000</pubDate>
    </item>
    <item>
      <title>AR6700-V模拟SD-WAN测试</title>
      <link>https://www.emulatedlab.com/thread-2304-1-1.html</link>
      <description><![CDATA[1、网络拓扑
实验拓扑很简单，1台AR作为RR，2台AR作为CPE，不涉及选路，最简单的1个路由域+1个传输端口，tunnel0作为创建BGP EVPN的控制通道，tunnel1作为数据通道。实验目的就是想抓包看下SD-WAN如何进行封装。

2、开启telnet
由于AR6700-V暂不支持telnet登录，不方便 ...]]></description>
      <category>案例分享</category>
      <author>cfplzjc</author>
      <pubDate>Tue, 06 Jan 2026 13:12:19 +0000</pubDate>
    </item>
    <item>
      <title>路由转发最长匹配解决大难题</title>
      <link>https://www.emulatedlab.com/thread-2286-1-1.html</link>
      <description><![CDATA[本次案例中给大家介绍一个非常有趣的项目小案例，话不多说，先上拓扑

拓扑介绍
1，总部采用双出口：电信，移动；分支采用单出口：移动
2，分支机构和总部电信出口之间建立IPsec VPN隧道，保护两端内网相关数据流。
配置说明
两端设备配置简单，都是基本的IPsec VPN 配 ...]]></description>
      <category>案例分享</category>
      <author>network123</author>
      <pubDate>Fri, 05 Dec 2025 13:13:30 +0000</pubDate>
    </item>
    <item>
      <title>华为防火墙GRE Over IPSec混合NAT场景配置案例来啦</title>
      <link>https://www.emulatedlab.com/thread-2282-1-1.html</link>
      <description><![CDATA[实验拓扑如下:

FW1配置:
interface Tunnel0
 ip address 10.1.0.12 255.255.255.0
 tunnel-protocol gre
 source GigabitEthernet1/0/1
 destination 155.1.131.13
 ospf enable 1 area 0.0.0.0
#
[FW-1]dis zone 
trust
 interface of the zone is (2):
    GigabitEt]]></description>
      <category>案例分享</category>
      <author>yangjinyu945</author>
      <pubDate>Sun, 30 Nov 2025 05:18:54 +0000</pubDate>
    </item>
    <item>
      <title>本地园区和DC与华为云对接BGP Over IPSec典型配置</title>
      <link>https://www.emulatedlab.com/thread-2277-1-1.html</link>
      <description><![CDATA[![11111.png](data/attachment/forum/202511/28/164810mxoxkz0vtd0vdqg6.png &amp;quot;11111.png&amp;quot;)

华为防火墙配置:
ike proposal 10
encryption-algorithm aes-256
dh group14
authentication-algorithm sha2-256
authentication-method pre-share
integrity-algorithm]]></description>
      <category>案例分享</category>
      <author>yangjinyu945</author>
      <pubDate>Fri, 28 Nov 2025 08:48:26 +0000</pubDate>
    </item>
    <item>
      <title>路由优选顺序</title>
      <link>https://www.emulatedlab.com/thread-2256-1-1.html</link>
      <description><![CDATA[当路由器通过不同途径学到多条路由信息时，路由优选顺序如下：

本图选自《路由之路》，这份资料是十多年数通路由经验的精华萃取，通过大量详实案例，对现今网络环境中常用路由协议做了详细的介绍，同时结合各大主流数通厂商的资料汇总，不断丰富，不断完善，授之以鱼， ...]]></description>
      <category>案例分享</category>
      <author>network123</author>
      <pubDate>Wed, 12 Nov 2025 06:30:06 +0000</pubDate>
    </item>
    <item>
      <title>模拟器中锐捷防火墙Z5100web管理界面登录配置</title>
      <link>https://www.emulatedlab.com/thread-2248-1-1.html</link>
      <description><![CDATA[模拟器中锐捷防火墙Z5100web管理界面登录配置
拓扑：

firewall login: root                     //输入root登录
root@firewall:~# nc-cli  -e         //输入nc-cli  -e进入命令行配置
firewall&amp;gt; edit running                 //输入edit running进入编辑模式
firewa ...]]></description>
      <category>案例分享</category>
      <author>guangqiang123</author>
      <pubDate>Sat, 25 Oct 2025 17:39:48 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】合集·企业上网行为管理部署和使用</title>
      <link>https://www.emulatedlab.com/thread-2247-1-1.html</link>
      <description><![CDATA[案例由大十字大佬分享
视频教程地址：
https://www.bilibili.com/video/BV1hRhgz5Enu/
实验环境：EVE-NG社区懒人版6.0下载地址：
https://www.emulatedlab.com/thread-2192-1-1.html]]></description>
      <category>案例分享</category>
      <author>hbugs001</author>
      <pubDate>Thu, 16 Oct 2025 14:49:30 +0000</pubDate>
    </item>
    <item>
      <title>终端路由表详解</title>
      <link>https://www.emulatedlab.com/thread-2238-1-1.html</link>
      <description><![CDATA[主机，服务器和网络设备一样，也存在一张路由表，这张表在数据转发时，起着非常重要的作用，今天通过一个案例，和大家一起认识一下主机路由表。
认识主机路由表

服务器（终端）通过双网卡接入网络：无线网卡接入互联网，配置有默认网关；VMnet8接入公司内网，没有配置 ...]]></description>
      <category>案例分享</category>
      <author>network123</author>
      <pubDate>Thu, 04 Sep 2025 12:35:55 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】Cisco设备PKI 实验-持续更新</title>
      <link>https://www.emulatedlab.com/thread-2232-1-1.html</link>
      <description><![CDATA[1、环境介绍

说明：图中红圈为实验涉及设备，设备清单列表如下：



区域
设备
镜像




站点 1
CSR1
懒人版默认 CSR 镜像文件


站点 2
CSR2
懒人版默认 CSR 镜像文件


站点 2
CSR3
懒人版默认 CSR 镜像文件


核心
VIOS
懒人版默认VIOS 镜像文件




 站点 1 通过 W ...]]></description>
      <category>案例分享</category>
      <author>wo1261450762</author>
      <pubDate>Fri, 08 Aug 2025 07:31:05 +0000</pubDate>
    </item>
    <item>
      <title>路由双点双向重发布-终极攻略</title>
      <link>https://www.emulatedlab.com/thread-2230-1-1.html</link>
      <description><![CDATA[路由双点双向重发布是网络中一个热点话题，无论是实际项目，还是各种考试，都会遇到这一场景。这一场景涉及到非常复杂的路由知识点，可以考察一位网络工程师对路由知识的综合掌握程度。本文将系统剖析这一场景，并针对出现的问题，给出详尽的解法。

1，案例背景
本案例 ...]]></description>
      <category>案例分享</category>
      <author>network123</author>
      <pubDate>Wed, 06 Aug 2025 02:57:15 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】拆堆叠升级第三期：丢失配置解决方案</title>
      <link>https://www.emulatedlab.com/thread-2218-1-1.html</link>
      <description><![CDATA[案例由大十字大佬分享
视频教程地址：
https://www.bilibili.com/video/BV19oTRz7EeH/
实验环境：EVE-NG社区懒人版6.0下载地址：
https://www.emulatedlab.com/thread-2192-1-1.html
注意：
实验环境由前两期视频使用的5.1懒人版升级到了6.0懒人版，华三堆叠设备从5.1 ...]]></description>
      <category>案例分享</category>
      <author>hbugs001</author>
      <pubDate>Mon, 09 Jun 2025 16:38:20 +0000</pubDate>
    </item>
    <item>
      <title>Linux基于Vxlan透传交换机vlan建立ospf邻居</title>
      <link>https://www.emulatedlab.com/thread-2213-1-1.html</link>
      <description><![CDATA[Linux 基于 VXLAN 透传交换机 VLAN 建立 OSPF 邻居实验指南
一、实验概述
本实验旨在于两台 Linux 设备之间通过配置 VXLAN 隧道，模拟二层专线通信，将两台分别连接到 Linux 设备的交换机上的特定 VLAN 流量（包含 OSPF 报文）透明地传输过去，最终实现跨越底层网络的交 ...]]></description>
      <category>案例分享</category>
      <author>569305227</author>
      <pubDate>Sun, 25 May 2025 06:09:00 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】F5实验LTM+DNS环境</title>
      <link>https://www.emulatedlab.com/thread-2207-1-1.html</link>
      <description><![CDATA[1、实验环境拓扑
更新前：
更新后：

 附件：F5-LAB.zip
=================================================================
2025-05-24更新如下：
1、增加LAB文件，通过最新懒人版导出的lab文件。
2、拓扑图更新，新增加windows server，运行在ISP网络环境中，window ...]]></description>
      <category>案例分享</category>
      <author>wo1261450762</author>
      <pubDate>Thu, 22 May 2025 10:19:33 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】拆堆叠升级第二期：升级全过程</title>
      <link>https://www.emulatedlab.com/thread-2199-1-1.html</link>
      <description><![CDATA[案例由大十字大佬分享
视频教程地址：
https://www.bilibili.com/video/BV1MvJAzREGM
实验环境：EVE-NG社区懒人版6.0下载地址：
https://www.emulatedlab.com/thread-2192-1-1.html
实验中使用的华三防火墙比较老，需要从韧体大佬网盘下载对版本来测试
https://www.emu ...]]></description>
      <category>案例分享</category>
      <author>hbugs001</author>
      <pubDate>Sat, 17 May 2025 13:56:46 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】拆堆叠升级第一期：升级过程方案编写</title>
      <link>https://www.emulatedlab.com/thread-2194-1-1.html</link>
      <description><![CDATA[案例由大十字大佬分享
视频教程地址：

实验环境：EVE-NG社区懒人版6.0下载地址：
https://www.emulatedlab.com/thread-2192-1-1.html]]></description>
      <category>案例分享</category>
      <author>hbugs001</author>
      <pubDate>Tue, 13 May 2025 00:13:10 +0000</pubDate>
    </item>
    <item>
      <title>VXLAN BGP EVPN 基础配置-使用EVE-NG</title>
      <link>https://www.emulatedlab.com/thread-2188-1-1.html</link>
      <description><![CDATA[实验拓扑

EVE-NG拓扑导出文件
 附件：VXLAN BGP EVPN.zip
视频合集链接如下
https://space.bilibili.com/423219115/lists/3328767
以下是视频4-1到4-9开始的实验具体配置
（视频出处为：https://www.udemy.com/course/vxlan-bgp-evpn-by-arash-deljoo/）
Spine 1:1   S ...]]></description>
      <category>案例分享</category>
      <author>mininer</author>
      <pubDate>Sat, 26 Apr 2025 02:30:29 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】EVE-NG中H3CvAC桥接物理AP进行无线portal测试</title>
      <link>https://www.emulatedlab.com/thread-2187-1-1.html</link>
      <description><![CDATA[1、网络拓扑
做这个实验有很多前置条件，需要大家先提前准备才能做。
（1）vAC使用R5482（最新的镜像有），was4300.ipe在5群里有，找不到可以问下版主。

（2）这里使用SW02是真机S5320，原因是该型号支持POE供电，如果有AP电源适配器，可以不用这样桥接
（3）本来也打 ...]]></description>
      <category>案例分享</category>
      <author>cfplzjc</author>
      <pubDate>Thu, 24 Apr 2025 16:32:12 +0000</pubDate>
    </item>
    <item>
      <title>【案例分享】思科EVPN标准数据中心测试</title>
      <link>https://www.emulatedlab.com/thread-2179-1-1.html</link>
      <description><![CDATA[1、网络拓扑
标准的Spine-Leaf架构，防火墙使用ASA，采用HSRP实现双机冗余

2、设备配置，注标红命令，表示需要重启才能生效。
（1）Cisco-PE01
!
hostname PE01
!
interface Loopback0
 ip address 88.1.1.1 255.255.255.255
!
interface Ethernet1/0
 ip address 172. ...]]></description>
      <category>案例分享</category>
      <author>cfplzjc</author>
      <pubDate>Tue, 15 Apr 2025 07:15:04 +0000</pubDate>
    </item>
  </channel>
</rss>