hbugs001 发表于 2022-1-27 07:50:51

CCNA/CCNP Cisco EIGRP lab set

Covered technologies, EIGRP
Lab requirements: x4 vCPU, 8GB RAMImages used in labs:
[*]vios-adventerprisek9-m.SPA.158-3.M2
[*]i86bi_LinuxL3-AdvEnterpriseK9-M2_157_3_May_2018.bin
[*]EVE-NG Docker: eve-gui-server
Labs package:
[*]4-1 EIGRP Single AS
[*]4-2 EIGRP Stub Leak Map
[*]4-3 EIGRP Frame Relay over Multipoint Subinterfaces
[*]4-4 EIGRP LISP OTP



Note: After lab set is imported, please make sure you have set for lab with proper vIOS or IOL image. The image version used in lab, is shown on the Topology.Lab contains 2 configuration sets Default and Solved. Default configuration set has no configuration.
Steps to start a lab:
[*]Make sure your lab has set proper vIOS or IOL images version for all nodes
[*]Use Side bar/More Actions/Wipe All (clean previous saved NVRAM)
[*]Side bar/More Actions/Start All
[*]Side Bar/Lab Tasks/Workbook

wangzhibo_6327 发表于 2022-6-12 20:19:54

感谢分享

dandan2012 发表于 2022-10-1 17:49:46

感谢分享好资源

zorro 发表于 2024-3-11 15:19:11


感谢分享

jakoli 发表于 2024-7-22 10:32:31

感谢楼主分享！
页: [1]
查看完整版本: CCNA/CCNP Cisco EIGRP lab set