|
本帖最后由 zh384144429 于 2020-7-10 12:24 编辑
网上搜索了很多最后在站长帖子里让去读官方的how to 但是英文不太好,所以我在这里搬运一下,方便有同样的问题的老铁快速解决问题
首次初始化后进入系统中确定是否有 nxos XXXX.bin这样的文件
N9K(config)# dir
4096 Jul 08 05:18:32 2020 .rpmstore/
4096 Jul 08 05:19:03 2020 .swtam/
1548017 Jul 08 06:46:49 2020 20200708_052030_poap_30604_1.log
1048634 Jul 08 05:56:16 2020 20200708_052030_poap_30604_init.log
0 Jul 08 05:18:55 2020 bootflash_sync_list
982681088 Mar 04 05:07:32 2020 nxos.7.0.3.I7.8.bin
0 Jul 08 06:47:51 2020 platform-sdk.cmd
4096 Jul 08 05:20:26 2020 scripts/
4096 Jul 08 05:20:58 2020 virt_strg_pool_bf_vdc_1/
4096 Jul 08 05:20:29 2020 virtual-instance/
59 Jul 08 05:19:08 2020 virtual-instance.conf
Usage for bootflash://
1527156736 bytes used
2010062848 bytes free
3537219584 bytes total
然后配置开机启动镜像 保存即可N9K(config)# boot nxos bootflash:///nxos.7.0.3.I7.8.bin
Performing image verification and compatibility check, please wait....
N9K# copy running-config startup-config
[########################################] 100%
如果开机就进入 LOADER模式
直接输入boot + bin文件启动后,再如上配置boot启动项就行了。
loader > dir
Setting listing for bootflash:
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Going to print files for device bootflash: 1
.rpmstore
nxos.7.0.3.I7.8.bin
bootflash_sync_list
.swtam
virtual-instance
virtual-instance.conf
virt_strg_pool_bf_vdc_1
scripts
20200708_052030_poap_30604_init.log
20200708_052030_poap_30604_1.log
platform-sdk.cmd
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Number of devices detected by BIOS is 1
Clearing listing for bootflash:
loader > boot nxos.7.0.3.I7.8.bin
|
|